Ch-899 Chouchin Radio Controlled Clock Instructions Official

Understanding the physical movement layout ensures a seamless setup process: Specification CH-899 Chouchin Quartz Movement Power Source 1 × 1.5V AA / LR6 Alkaline Battery (not included) Accuracy

: For the best signal, place the clock near a window facing Colorado during the setup. TLC Electrical Supplies Manual Time Setting

Immediately after inserting the battery, the hands will start spinning rapidly.

facing towards Fort Collins, Colorado (the transmitter location) and away from electronics like TVs or computers. Hard Reset ch-899 chouchin radio controlled clock instructions

A: Many CH-899 movements have a "REC" (Receive) button. Pressing and holding this button for 2-3 seconds forces a new signal search. If your movement lacks this button, removing and re-inserting the battery will also trigger a fresh search for the signal.

Follow these steps exactly to set up your CH-899 Chouchin clock for the first time or after a complete battery replacement. Step 1: Preparation

By following the instructions in this comprehensive guide, you can ensure that your CH-899 clock provides you with beautiful, reliable, and maintenance-free timekeeping for years to come. Hard Reset A: Many CH-899 movements have a

Press and hold the button for 3 seconds. The hands will begin to move. Press and hold the SET button to move the hands quickly.

If the clock is displaying the wrong time, you can manually trigger a search for the atomic signal: Press and hold the button for at least 3 seconds .

: For a hard reset, some CH-899 models have two pins on the movement that can be short-circuited with a metal object to clear the memory. MSF Radio Controlled Wall Clock - TLC Electrical Supplies Follow these steps exactly to set up your

“If the radio signal is not received, press the SET button for 3 seconds to enter manual mode.”

Remove the battery. Press the RESET pinhole button or hold the SET button down for 10 seconds to drain any residual power. Insert a brand-new battery and let the automatic calibration phase begin again. Long-Term Maintenance Tips