Lanbench __top__ -

Once the benchmark finishes, LANBench displays the average transfer speed, typically measured in Megabits per second (Mbps) or Megabytes per second (MB/s).

You can configure packet sizes, connection durations, and the number of simultaneous connections.

: Users can toggle between Transmission Control Protocol (TCP) for verifying error-corrected, reliable delivery and User Datagram Protocol (UDP) to test raw, loss-tolerant streams like VoIP and video streaming. LANBench

| Parameter | Options | | --- | --- | | | Set the length for each measurement run (e.g., 10 seconds, 30 seconds, 1 minute) | | Packet Size | Adjust the size of data packets transmitted during testing (from small control-sized packets up to large jumbo frames) | | Connections | Configure up to 20 simultaneous TCP connections to simulate real-world multitasking or heavy load scenarios | | Transfer Mode | Select between bidirectional communication (send and receive), unidirectional upload testing, or unidirectional download testing | | Server Address | Input the IP address of the listening computer (e.g., 192.168.1.105 ) | | Port Number | Match the port configured on the server side (default port is 8988) |

It operates on a client/server model, requiring one machine to act as the sender (client) and the other as the receiver (server). Key Features of LANBench Once the benchmark finishes, LANBench displays the average

Users can adjust packet sizes and test durations to simulate different types of network traffic.

Always use Ethernet cables for testing whenever possible. Wi-Fi testing is valuable but introduces variables like signal strength and interference. | Parameter | Options | | --- |

While LANBench remains popular due to its simple, graphical user interface (GUI), it is an older tool that has largely been succeeded by more modern command-line utilities.

Yes, LANBench works over any TCP/IP network connection, including Wi-Fi. However, wireless results vary significantly based on distance, interference, and concurrent device usage. For troubleshooting suspected wireless problems, test the same devices over wired Ethernet to determine whether the issue lies in the wireless connection or elsewhere in the network.

lanbench -s -p 8080

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.