Disconnect the phone and power it on. The first boot might take 5-10 minutes. Troubleshooting: "Error: 0x13 (Storage type mismatch)"
Are you currently facing a specific error code in the ?
Restart your computer to ensure the drivers are fully integrated. Step 2: Extract the Firmware and Flash Tool
If this guide saved your Sanno i7 Plus, share this article with other users who might be struggling with a bricked phone. Always remember to double-check the Preloader option and keep a safe backup of your files before you begin. sanno i7 plus flash file firmwae mt6580 update stock rom
To help you find the correct software variation, could you share the currently listed under your device settings, or let me know the specific error code you encounter if the flash tool fails? Share public link
Try holding the or Volume Up button while connecting the USB cable to force the device into the correct preloader mode. Stuck in Boot Loop After Flashing
Download and extract the Sanno I7 Plus firmware zip file on your computer. You will see a folder containing the scatter file ( .txt ). Open SP Flash Tool: Run flash_tool.exe as Administrator. Disconnect the phone and power it on
The utility software used to push the firmware files onto the device hardware. ⚙️ Step-by-Step Flashing Instructions
Connect your phone to the PC via USB cable while holding the or Volume Up button (usually Volume Down) to initiate the flashing process.
The tool will automatically populate a list of system partitions (such as preloader, recovery, system, and boot). Look at the drop-down menu on the left side of the window. Restart your computer to ensure the drivers are
Navigate to your extracted firmware folder, look for a text file named MT6580_Android_scatter.txt , and select it.
Disconnect the phone and power it on. The first boot may take 5–10 minutes.