Insert a barrel nut into the pre-drilled hole on the inside of the side panel. Use a flathead screwdriver to orient the slot of the barrel nut toward the incoming bolt hole.
Pre-thread bolts into the bottom legs of the footboard. Insert 2-inch Allen bolts through the crib's side panels and into the footboard, securing them with the Allen wrench. Lifestyle Conversions Crib (1921) - Assembly and Operation Manual
Disclaimer: This guide is for informational purposes. Always refer to the physical manual included with your specific Bonavita Hudson II crib, as manufacturing revisions may occur. bonavita hudson ii lifestyle crib instructions
Insert barrel nuts into the designated holes on the inside of the back panel rails. Use a flathead screwdriver to align the slot of the barrel nut so it faces the incoming bolt hole.
Store or safely discard the side stationary gates and the metal mattress spring frame. Insert a barrel nut into the pre-drilled hole
Secure the mattress support bracket to the side rails using the appropriate bolts, making sure it is level.
The is a versatile piece of furniture designed to transition with your child from infancy to adolescence. This guide covers its primary assembly and mattress adjustments based on standard Bonavita lifestyle model procedures. Pre-Assembly Requirements Insert 2-inch Allen bolts through the crib's side
Use only water on a damp cloth for cleaning surfaces, as cleaning abrasives can scratch the finish.
Insert barrel nuts into the predrilled holes of the stabilizer bars. Align them to capture the bolts. Connect Headboard and Sides: