Skope Heated Towel Rail Timer Instructions Work Today

: When first turned on, the rail automatically follows a "Pre-set function": it stays ON for 4 hours , followed by 8 hours OFF .

If the timer stops prematurely, it may be due to "open window detection" – where the rail turns off if the room temperature drops suddenly by 5°C.

Push down all the small segments for the times you want the towel rail to be on. Example: 6:00 AM – 9:00 AM and 5:00 PM – 10:00 PM. skope heated towel rail timer instructions

: From the main menu, select "Pr" (Program) using the MODE button.

Most users prefer their towel rails to turn on 30 to 45 minutes before they shower. : When first turned on, the rail automatically

The or OVERRIDE button toggles how the timer behaves:

Use the arrow keys (up/down) to set the current time. Confirm: Press the "Clock" button again to set. Programming the Schedule Enter Program Mode: Press the "P" or "Program" button. Select Day: Navigate through the days of the week. Set "On" Time: Select the start time (e.g., 6:00 AM). Set "Off" Time: Select the stop time (e.g., 8:00 AM). Save: Exit the program menu to save your settings. 4. Power Failure Memory Function Example: 6:00 AM – 9:00 AM and 5:00 PM – 10:00 PM

Many digital wall timers feature an internal rechargeable battery to save settings during power outages. If the mains power has been off for a long period, leave the unit turned on at the wall for a few hours to allow the backup battery to recharge. The Towel Rail Stays Hot Permanently

: To have the rail on from 7:00 AM to 9:00 AM (2 hours), you would push out the 8 black segments covering that 120-minute period.

If your model includes a valve or knob, turn it anti-clockwise to increase heat and clockwise to decrease or turn it off.

Most Skope heated towel rail installations utilize either a standard digital 24-hour/7-day programmable timer or a simple boost countdown timer. Before programming, familiarize yourself with the standard button layout on a digital Skope controller: