En 61326-1 Pdf Jun 2026
Instruments used for preparation, treatment, measurement, or analysis of substances.
(International Electrotechnical Commission - identical technical content as IEC 61326-1)
If you rely today on an from 2013, you will be non-compliant when these changes are enforced.
The document you're referring to is likely a standard related to electromagnetic compatibility (EMC) for electrical equipment used in measurement, control, and laboratory applications. EN 61326-1 is a European standard that corresponds to the international standard IEC 61326-1. en 61326-1 pdf
Defining the Equipment Under Test (EUT) modes of operation.
EN 61326-1 defines two categories: (typical lab, office) and controlled electromagnetic environment (e.g., shielded room). Don’t over-design or under-design – read the definitions in Clause 3.
This standard applies to electrical equipment operating from a supply or battery of less than or 1,500 V DC . It specifically covers: EN 61326-1 is a European standard that corresponds
requirements for electrical equipment used in measurement, control, and laboratories iTeh Standards Compliance with this standard provides a presumption of conformity with the European EMC Directive 2014/30/EU , allowing manufacturers to CE mark their products. iTeh Standards 1. Scope and Applicability
Industrial locations are characterized by proximity to heavy machinery, power electronics, and high-voltage distribution systems. Because these environments feature high electromagnetic noise, equipment tested for industrial use must withstand much higher immunity test levels. 3. Controlled Electromagnetic Environment
Investing €200-300 in the official PDF is a fraction of the cost of a failed EMC test ($2,000 – $10,000 per day in a lab). More importantly, it protects your company from liability, fines, and product recalls. Don’t over-design or under-design – read the definitions
If your product is a pH meter, oscilloscope, temperature controller, analytical balance, or data acquisition system – you are likely within scope.
The standard is updated approximately every 5–7 years. When a new edition of the is released (e.g., transition from 2013 to 2021), you have a transition period (typically 3 years) to update your product and technical file.
EN 61326-1 is the harmonized European standard that dictates Electromagnetic Compatibility (EMC) requirements for electrical equipment designed for measurement, control, and laboratory use. If you are manufacturing, importing, or distributing laboratory instruments, industrial controllers, or test equipment within the European Economic Area (EEA), compliance with this standard is a legal prerequisite for applying the CE Mark.
You can find public examples of these reports, such as this sample EMC test report for industrial equipment. 2. Accessing the Standard (PDF)