Gemel Txshs User Manual - __link__

Release the buttons; the LED should now stay lit.

| | Possible Cause | Solution | | :--- | :--- | :--- | | 🔑 Remote does nothing (LED off) | Dead remote battery | Replace the 3V fob battery | | ⏱️ Remote works sometimes or only after ignition off | The 30-second arming window | Press button within 30 seconds of turning ignition off | | 🔒 Vehicle locks/unlocks but won't start | Immobilizer active (low main battery, system fault) | Recharge main battery, use override key, or call a professional | | 🚨 Siren self-activates or is silent | Low/dead backup batteries | Have a professional inspect/replace siren unit backup batteries | | 🔄 Alarm randomly triggers | Faulty motion/impact sensor or low backup batteries | Disable motion sensor (press Arm twice) or have system checked | Gemel Txshs User Manual

Navigating the Gemel TXSHS system relies entirely on visual cues (indicator flashes) and auditory signals (siren beeps). 1. Arming the Security System Release the buttons; the LED should now stay lit

If you are transporting the bike (e.g., on a trailer) and want to keep the alarm active without the tilt sensor, press Button 1 twice Arming the Security System If you are transporting

This manual outlines operation, emergency synchronization, system programming, and battery maintenance. Component Overview

Release both buttons. The LED should now stay on. Press either Button 1 or Button 2 once. The LED should turn off.