Egs002 Proteus Library -
Note: Most libraries simulate the EG8010 IC, not the entire EGS002 board. You will need to add your own IR2110 models (included in standard Proteus) and MOSFETs around it.
If a pre-made EGS002 library block is unavailable, you can build an equivalent functional model inside Proteus using standard components. Step-by-Step Model Assembly
Use an Arduino or a generic microcontroller model programmed with an SPWM code script to act as the EG8010 chip. egs002 proteus library
The EGS002 library is generally not available in the default Proteus installation. You can acquire it through these methods:
The EGS002 is a widely used driver board designed for single-phase pure sine wave inverters. Powered by the EG8010 digital generator chip and an IR2113S high-voltage driver, it serves as the core control hub for converting direct current (DC) into clean alternating current (AC). Testing these circuits physically can lead to destroyed components due to timing or wiring errors. Simulating your design in Proteus is the safest way to validate your inverter circuit before building a hardware prototype. Understanding the EGS002 Module Architecture Note: Most libraries simulate the EG8010 IC, not
Place the EG8010/EGS002 symbol into your schematic. Connect a virtual DC power supply to the VCC and GND pins.
The module has a 17-pin interface that you will need to model. The most important pins for a functional simulation are: Step-by-Step Model Assembly Use an Arduino or a
Approach B: Building an Equivalent Circuit (The Native Method)
Since EG8010 can't be simulated in Proteus, use this approach:
Close the Library Manager and return to the main schematic capture window. Now, go to Library again and select New Component to launch the Device Creation Wizard.
To simulate, design, or PCB-layout an inverter using this board in Proteus, you need a specialized . This article covers how to acquire, install, and utilize the EGS002 library for creating efficient SPWM inverter designs. 1. What is the EGS002 Board?