In the driver setup window, click or navigate to Windows Devices and Printers .
Re-enter the printer properties and confirm the driver is set to POS-80 . If using a Serial COM port, ensure the baud rate matches the internal hardware speed (typically 9600 or 115200 ).
This usually indicates an incorrect "Baud Rate" (for Serial connections) or the wrong driver series. Ensure you selected POS-80 and not POS-58.
The Black Copper P80 should immediately feed paper and print a Windows test layout showing driver details. black copper pos p80 driver setup v7.17
: In the Device Settings tab, configure the cash drawer to open "Before Printing" or "After Printing".
: Choose NET or Ethernet . You will be prompted to enter the static IP address assigned to the printer.
For the printer to receive data from your point-of-sale software, it must be mapped to the physical port it is plugged into. For USB Connections (Most Common) In the driver setup window, click or navigate
Setting up a point-of-sale (POS) thermal receipt printer requires the exact software driver to ensure seamless communication between your computer and the hardware. The Black Copper POS P80 is a widely used 80mm thermal receipt printer valued for its speed and reliability in retail and hospitality environments.
: Choose USB from the port selection dropdown. If the printer is connected and turned on, the installer will attempt to map the active virtual USB port automatically (e.g., USB001 or USB002 ).
: Connect the power cable to the printer and plug it into an active electrical outlet. Turn the power switch on. This usually indicates an incorrect "Baud Rate" (for
Click the button in the bottom right corner.
Complete Installation Guide for Black Copper POS P80 Driver Setup v7.17
This occurs when the driver version conflicts with the emulation settings.
Connect the printer to your computer using a USB cable (or LAN/Serial cable, depending on your interface model).