Open the menu, select , and navigate to your desired files.
Standard IEC AC power connector (100V - 240V AC, 50/60Hz).
Before we manipulate the buttons, let’s understand what the V760 is. The NovaStar V760 is a 10-bit, high-definition LED sending card. Unlike integrated controllers (like the MCTRL660), the V760 is designed to be used with a separate PC running NovaStar’s LCT (LED Control Tool) software.
Rows of female chassis connectors for HDMI, DVI, VGA, and CVBS. novastar v760 manual
2x RJ45 Network Ports (connecting to receiving cards). Control Interfaces: USB (to PC), RS232 (serial control). Power Interface: 100-240V AC, 50/60Hz. 3. Configuration and Setup (NovaLCT)
Rotate to navigate menus; press down to confirm choices.
Includes shortcut keys for PIP (Picture-in-Picture), Scale (Auto-fit), and Freeze/Blackout functions. Rear Panel Connections Inputs: 1x HDMI 1.3 1x CVBS (AV) 1x USB (for thumb drive playback) Outputs: Open the menu, select , and navigate to your desired files
For standard setups, the V760 allows "Quick Point Screen" without needing a computer.
Follow these steps to safely connect your NovaStar V760 to your video sources and LED video wall.
By keeping this guide handy and downloading the official PDF from NovaStar, you will turn your V760 from a mysterious black box into the most reliable tool in your LED rental or installation kit. The NovaStar V760 is a 10-bit, high-definition LED
Connect your video source (e.g., PC or media player) to the HDMI or DVI port. Output: Run Ethernet (Cat5e/6) cables from the 's two output ports to your LED cabinets. Control: Connect the to your PC via a USB cable to use the NovaLCT software . 2. Screen Mapping with NovaLCT LED Video Wall Configuration with Novastar Controller
What are you connecting to the V760 (e.g., PC, media player, camera)?
Displays current status, resolution, active input, and the operation menu.