Hofmann Duolift Gte 2500 Manual Jun 2026

Use the “lower” button to bring the lifting arms to their lowest position. Position the lifting pads under the tire’s tread or the wheel’s rim flange—never under the valve stem.

| Interval | Action | Details | |----------|--------|---------| | | Visual inspection | Check hoses, cables, hooks, and pads for damage or wear. | | Weekly | Function test | Run full raise/lower cycle without load. Listen for unusual noises. | | Monthly | Lubrication | Apply lithium grease to pivot pins, chain links, and roller guides. | | Quarterly | Hydraulic oil level check | Remove filler cap; oil should be visible at the center of the sight glass. Top up with ISO VG 32. | | Annually | Hydraulic oil change | Drain completely, flush with clean oil, refill with 3.5 liters of HLP 32. | | Biennially (2 years) | Safety valve test | Use a calibrated pressure gauge to verify relief valve setting (max 180 bar). | | 5 years | Hose replacement | Replace all hydraulic hoses, regardless of condition (rubber degrades internally). |

A secure foundation is the most critical safety requirement for any vehicle lift. Before installation, ensure your workspace meets these criteria: hofmann duolift gte 2500 manual

Ensure a certified electrician connects the master column control box to the slave column to enable proper synchronization. Operating Instructions

For installation and operation, adhering to the specifications in the is crucial. Rated Load Capacity: 2500 kg. Maximum Lifting Height: 1800 mm. Lifting Time: Approximately Pick-up Height: 95–165 mm (depending on adjustable pads). Power Supply: Standard 3/PE AC 50 Hz 380–415 V. Drive Type: Electro-mechanical (spindle). 3. Installation and Safety Instructions (Overview) Use the “lower” button to bring the lifting

The is an electromechanical, two-post automotive lift with a maximum load capacity of 2,500 kg (2.5 tonnes) . Highly favored by automotive workshops and tire repair shops, this heavy-duty machine utilizes a base-frame design featuring rolled-thread lifting spindles and wear-resistant Nylatron load nuts. Because safe operation, installation, and repairs depend entirely on the manufacturer's engineering guidelines, having access to the official Hofmann Duolift GTE 2500 manual is essential for any workshop technician.

Minimum C20/25 grade concrete (or equivalent standard mix). | | Weekly | Function test | Run

The manual details the power unit assembly, typically located on one of the columns. It explains the function of the:

Roll each column into place on either side of the wheel/tire assembly. The manual requires a minimum distance of 1,200 mm between column centers for stability.

The Hofmann Duolift GTE 2500 relies on a precision-machined load nut and safety nut system riding on a vertical steel spindle. Regular lubrication is the single most important factor in extending the lifespan of these components. Lubrication Schedule