Intronics Digital Room Thermostat User Guide |work| -

A: This is called short cycling. Increase the hysteresis (advanced setting) from 0.5°C to 1°C or 1.5°C. Refer to your specific manual for “CPH” (cycles per hour) adjustment.

If you encounter any problems with your thermostat, refer to the troubleshooting guide:

Before installing your thermostat, ensure that you have: intronics digital room thermostat user guide

Wiring (general)

Cut the plastic notch to create a hole for surface-mounted wires. Secure the back plate to the wall. 2.2. Wiring Diagram A: This is called short cycling

Protects the compressor with a mandatory time delay feature.

: Use pliers to open the plastic hole on the side for surface-mounted wiring. Secure Back Plate If you encounter any problems with your thermostat,

I can provide targeted troubleshooting steps or wiring advice for your exact setup. Share public link

Intronics thermostats typically feature , which minimizes temperature fluctuations compared to standard on/off controllers. PI02 Model : 24 VAC floating digital thermostat. PI04 Model : 24 VAC/VDC modulating digital thermostat. Series II LED/LCD

: Use the △ (Up) or ▽ (Down) keys to set your desired temperature. The standard set-point range is 10°C to 35°C (50°F to 95°F).

You did not buy a digital thermostat just to be comfortable; you bought it to save 15-30% on your heating bill.