Create Guest Network On Xiaomi Mi Router Ax1800 Work [ Certified ]

To ensure the guest network functions exactly how it is supposed to—providing internet while isolating local traffic—verify these critical toggle settings inside the menu:

Scroll down until you find the configuration block. Step 2: Configure Your Guest Network Parameters

The allows you to create a secure guest network that is isolated from your primary network . This prevents visitors from accessing your shared files, local devices, or sensitive information while still providing them with high-speed internet. How to Enable the Guest Network

Click on the tab at the top of the page, then select Wi-Fi Settings from the sub-menu. 4. Locate the Guest Network Section create guest network on xiaomi mi router ax1800 work

: Ensure you are on the latest firmware, as early versions of the AX1800 had limited mesh and networking features that were later expanded. Summary Verdict The guest network feature on the Xiaomi AX1800 is a must-use for security-conscious users

: Scroll down to find the Guest Network section and toggle the switch to "On" . Configure Credentials :

| Feature | Guest Network | Share Wi-Fi | | :--- | :--- | :--- | | | Settings -> Guest Wi-Fi | MiWifi App Home -> Share Wi-Fi | | How it works | Creates a separate SSID | Sends your main password via WeChat/WhatsApp | | Security | High (Isolated) | Low (Gives full access to main network) | | Best for | Strangers, nannies, IoT devices | Family members only | To ensure the guest network functions exactly how

For one-off gatherings, use the time limit feature to automatically turn off the guest network after the event ends. This prevents the network from remaining active unnecessarily.

Back in the main router menu, look for (Quality of Service) or "Bandwidth Control" .

Cons:

Launch the app and ensure you are logged into the Xiaomi account that owns the router. On the main dashboard, you should see your card. Tap on it to enter the router management screen.

You will then need to set up the for your guest network. It is highly recommended to choose a name that is distinct from your main network to make it easily identifiable for your guests (e.g., "Smith Family Guest" or "Home-Guest"). Next, set a password for this network. While you could leave it open, it is strongly advised to choose a strong password to prevent unauthorized access. You can also set a validity period for the guest network if you wish, after which it will automatically turn off.

Find the IP address of your personal laptop on the main network (e.g., 192.168.31.105 ). From the guest device, open a command prompt (Windows) or Terminal (Mac) and type: ping 192.168.31.105 How to Enable the Guest Network Click on

Creating a fully functional guest network on the Xiaomi Mi Router AX1800 is a 3-minute task that saves you years of potential security headaches. The key takeaways from this guide: