Evoko Liso Factory Reset Verified Access

Let the device read the USB drive. The screen will display a flashing or updating status. Once complete, the device will automatically reboot into the initial setup wizard screen. Remove the USB drive. Method 2: The Software Reset (Via the On-Screen Admin Menu)

Is the device , or can you still access the on-screen menus?

Choose and point the browser utility directly at the uncompressed or raw downloaded firmware reset .GZ image file.

Allow the automated scripts to cycle completely uninterrupted. 4. Finalize the Hardware Initialization evoko liso factory reset verified

Select the option and apply the necessary configurations (Server IP, Room ID, etc.).

Are you experiencing issues with your Evoko Liso device and need to perform a factory reset? Look no further! In this article, we will guide you through the process of verifying and performing a factory reset on your Evoko Liso device.

Insert your paperclip into the pinhole and hold down the internal button. Let the device read the USB drive

A: While you cannot easily back up a single Liso's configuration, Evoko Home provides tools to back up the entire system's configuration, which includes room and device settings. This backup can then be restored to a new or reset Liso.

Ensure you have access to your Evoko Home server application. You will need to re-initialize and re-bind the Liso screen to its respective meeting room after the reset.

Once the service menu appears, navigate using the touchscreen to select or Update Firmware via USB . Confirm the action when prompted. Remove the USB drive

Authenticate the device to your server and select the specific meeting room calendar this panel will display.

After a reset, the device might revert to an older firmware version. Always check for available updates via the Evoko Home "Global Properties" tab to ensure your hardware remains secure. Summary Key Points 💡 Use the pinhole for 10-15 seconds. Software Reset: Use the Admin Menu if the PIN is known.