Before any structural design begins, the ground must be prepared. This standard governs excavation, backfilling, and soil stabilization.
Understanding the documents is one thing; applying them on a jobsite is another. This is where the "SAIC" forms come in.
Soil stability dictates facility safety. Saudi Aramco divides these disciplines into strict geotechnical evaluation and rigorous execution protocols. Geotechnical Requirements (SAES-A-114)
Detailed manufacturing and procurement requirements for materials used in civil works. Saudi Aramco Engineering Standards For Civil
Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates.
The Saudi Aramco Engineering Standards for Civil offer several benefits, including:
Demands rigorous field testing, including slump tests, air-content tests, and compressive strength cylinder testing at 7 and 28 days. 3. Foundations for Static Equipment (SAES-Q-005) Before any structural design begins, the ground must
Factors in dead loads, live loads, thermal expansion forces, wind loads, and seismic loads based on ASCE 7.
The primary differentiator between standard international codes and SAES is the adaptation to local environmental extremes:
As-built drawings shall be submitted to Saudi Aramco upon completion of the project, which shall include: This is where the "SAIC" forms come in
Quality Assurance (QA) and Quality Control (QC) are interwoven into these material standards. The documents do not merely specify the end product; they dictate the process. From the sourcing of aggregates to the frequency of slump tests and cylinder breaks, the standards ensure that every batch of concrete is traceable and verifiable. This rigorous documentation is essential for forensic analysis should a defect arise, allowing engineers to pinpoint the root cause immediately.
It heavily adopts frameworks from the American Society of Civil Engineers (ASCE 7), American Concrete Institute (ACI 318), and the American Institute of Steel Construction (AISC Steel Construction Manual).
Used by QA/QC engineers to verify that construction work meets the required SAES/SAMSS criteria. Key Civil Engineering Standards (SAES)
Defines strict third-party laboratory testing regimens for compressive strength, rapid chloride permeability (RCPT), and water absorption.
Cross-references strict coating standards (SAES-H series) to prevent atmospheric corrosion in high-humidity coastal zones like Dhahran and Jubail. 5. Blast-Resistant Design (SAES-M-009)