Check the boxes for both counters. Click (not “Clear EEPROM” – that wipes everything!). A popup will ask “Are you sure?” – Click Yes .
Advanced users drill a small hole, redirect the internal ink tube, and drain the waste ink into an external plastic bottle.
Once finished, the program will ask you to turn off the printer . Turn it off, then back on. The red lights should stop blinking, and the printer status should return to "Ready".
If you need help resolving a specific error code or locating physical replacement parts, tell me: epson adjustment program l3156
Select Waste ink pad counter from the list and click OK . Check & Reset: Check the box for Main pad counter . Click Check to see current usage. Click Initialize to reset the counter to zero.
A warning box flashed: Do not turn off the printer during this process.
There are two common software utilities used for the Epson L3156: the traditional "Adjustment Program" and the WICReset Utility. Both achieve the same goal. Check the boxes for both counters
When this counter reaches a pre-set limit (often 100%), the printer enters a locked state to prevent the pad from potentially overflowing and damaging the internal components. This condition is often signaled by one of the following:
Your Epson L3156 printer is a reliable workhorse, but like all EcoTank models, it features a built-in safety mechanism that will eventually stop it from printing. When this happens, you will see a error message, and the printer's red lights will flash alternately.
The adjustment program may not work correctly if your printer has the latest firmware. In some cases, you may need to downgrade the printer's firmware to an older version that is compatible with the reset tool. Advanced users drill a small hole, redirect the
Click the button on the right side.
The primary feature of the Epson Adjustment Program (AdjProg) for the L3156 is the Waste Ink Pad Counter Reset