Weierwei Vev-3288s Manual

VHF (136–174 MHz) or UHF (400–470 MHz) depending on the specific sub-model. Memory Channels: 128 channels. Output Power: 4 Watts (UHF) / 5 Watts (VHF). Battery Type: High-capacity Lithium-Ion (Li-ion). Channel Spacing: 12.5 kHz (Narrow) / 25 kHz (Wide).

Instructions for for software programming A list of compatible accessories like headsets or batteries Weierwei manuals? - RadioReference.com Forums

In this article, we will provide an in-depth review of the Weierwei Vev-3288s manual, covering its key features, specifications, and operating instructions. Whether you're a new user or an experienced one, this guide will help you unlock the full potential of your device and troubleshoot any issues that may arise.

Turn clockwise to switch the radio on and increase volume. Turn counter-clockwise to decrease volume and turn the radio off.

Comes with a 1200mAh Li-ion battery (standard) providing approximately 8-15 hours of talk time. Manual Programming & Operation Weierwei Vev-3288s Manual

The is a highly popular, ruggedized single-band handheld transceiver widely used in logistics, hospitality, security, and outdoor recreation. Known for its exceptional reliability, cost-effectiveness, and compatibility with the Puxing PX-777 hardware design, mastering this radio requires understanding its core programming hidden key combinations and menu structures.

Switch your display manually to the required Transmit frequency.

The Alarm Emergency button can be programmed to send an emergency alert sound if the user is in danger.

If you need help configuring specific settings, feel free to share your , the exact frequencies you want to program, or any repeater offsets required. I can walk you through the precise menu steps! Share public link VHF (136–174 MHz) or UHF (400–470 MHz) depending

While you can program this radio via PC software, its on-the-fly keypad programmability is a major advantage. The following steps allow you to program the radio directly.

Set the (Menu 16) and Offset Frequency (Menu 17).

If you prefer using a computer, be aware that many budget programming cables use counterfeit Prolific chips. If your PC fails to recognize the radio, you may need to (e.g., version 3.2.0.0) that doesn't include the "counterfeit detection" found in newer Windows updates.

The radio features a for scanning random frequencies and a Channel Mode (MR) for saved configurations. Battery Type: High-capacity Lithium-Ion (Li-ion)

| Code | Meaning | Fix (From Manual Page 41) | | :--- | :--- | :--- | | | Sensor Break (Input > 20mA or >10V) | Check wiring to AI1 or AI2. Is the sensor connected? | | E-04 | Output Overload (Short circuit) | Disconnect load on OUT1. Check for melted insulation on heater/pump wiring. | | E-07 | EEPROM Failure (Internal memory) | Cycle power. If persists, restore factory defaults (Parameter P-99). | | E-12 | Communication Timeout (Modbus) | Verify Baud Rate (P-80) matches your master. Check A/B terminals are not swapped. | | OUCH | Over-temperature (Internal) | Improve ventilation. The heatsink must not exceed 70°C. |

Press , then press the button corresponding to memory storage (usually MEM-CH or channel storage depending on firmware version). Scroll or type 001 to choose Channel 1. Press [ENTER] to save.

You can program the VEV-3288S manually using the front keypad. Follow these steps to set a standard frequency and save it to memory. Step 1: Switch to Frequency Mode

To enter the internal menu, press the button. Use the keypad or arrow keys to scroll through options, press [MENU] again to select an option, change its value, and press [ENTER] to save. Here are the most critical menu settings you need to know: Squelch Level (SQL)