Note: This system relies strictly on gravity. The entire length of the hose must slope downward from the machine. If the hose bends upward or kinks, water will back up and fill the internal tank instead. 4. Cleaning and Maintenance
| Problem | Possible Cause | Solution | | :--- | :--- | :--- | | | - Not plugged in - Tripped circuit breaker / blown fuse - Water tank is full or not properly installed - Room temperature is too low | - Ensure the plug is firmly in the wall outlet. - Check your home's circuit breaker or fuse box. - Empty the water tank and re-install it correctly. - Dehumidifiers won't operate effectively below 18°C (65°F). Move to a warmer room. | | Unit runs but doesn't remove moisture | - Air filter is dirty / clogged - Windows or doors are open - The set humidity level is higher than the current room level - Unit is in defrost cycle | - Unplug the unit and clean the filter. - Close all doors and windows to seal the room. - Lower the humidity setting on the control panel to below the current room level. - The auto-defrost cycle will stop dehumidification temporarily. This is normal. | | Loud or unusual noises | - Unit is on an uneven surface - The fan is hitting something or is broken - Parts are loose from moving the unit | - Place the unit on a flat, level floor. - Unplug and inspect the fan area for debris or damage. - Check for any loose screws or rattling parts. |
Plug the power cord into a grounded electrical outlet. Press the button. The digital screen will illuminate and display the current room humidity. Step 2: Selecting Your Operating Mode Choose the mode that matches your current household needs: Finether Dehumidifier Operating Instructions
Emptying the water tank frequently can be a chore. The Finether dehumidifier offers a more convenient solution: continuous drainage via an included hose. This is perfect for basements or other areas where you want the unit to run 24/7 without interruption.
Before calling customer support or requesting a return, check this quick troubleshooting list to resolve common operational issues. Potential Cause Actionable Solution Power cord unplugged or loose. Secure plug into a live wall socket. Water tank is full or improperly seated. Empty the tank and push it securely into place. Ambient room temperature is too cold. Move the unit to a warmer room (above 5°C/41°F). No moisture being collected Target humidity is set higher than room humidity. Lower the target humidity setting on the control panel. Air filter is heavily clogged with dust. Clean the air filter according to maintenance steps. Air intakes or outlets are obstructed. Clear furniture or curtains to provide 30-50 cm clearance. The unit is extremely loud Machine is resting on an uneven floor. Move the unit to a flat, level surface. Filter is loose or clogged. Re-seat or clean the filter. Ice buildup on the coils / Defrost light stays on Low airflow or freezing ambient temperatures. Note: This system relies strictly on gravity
While exact control panels vary by specific Finether models (such as the 12L, 16L, or 20L units), most share a standard, intuitive digital interface.
Select your speed preference. Use high speed during the day for quick results, and low speed at night to minimize background noise. Step 4: Setting the Timer (Optional) - Empty the water tank and re-install it correctly
While the unit is running, press the Timer button to set how many hours (1–24) the device should operate before turning off automatically.
While the unit is in standby (plugged in but powered off), press the Timer button to set how many hours until the device automatically powers on. 3. Water Drainage Methods
If you plan to not use your dehumidifier for an extended period, such as during a long vacation:
12 litre compressor dehumidifier with digital ... - USER MANUAL