Epson 1390 Resetter [upd] Jun 2026

Do not panic, and do not throw away your printer. This issue does not mean your machine is broken. It simply means the internal waste ink counter has reached its maximum limit.

Keep the box checked, and now click the Initialization button. A pop-up box will appear asking for confirmation. Click OK . Step 5: Finalize the Cycle

This means the software cannot see the printer. Check your USB cable connection, ensure the printer is turned on, and close any stuck print queues in Windows.

When your printer shows two alternating blinking red lights and a "service required" message, it means the internal waste ink counter has reached its limit. epson 1390 resetter

This is the best solution for high-volume users. You can run the waste ink tube out of the back of the printer into a small bottle, eliminating the need to ever worry about pads again.

Because the software only tricks the printer into thinking the pads are empty, taking care of the physical waste ink is highly recommended for long-term printer health.

Once this counter hits 100%, the printer completely locks itself down for safety. It will refuse to print, copy, or scan until the digital counter is reset to zero. What is an Epson 1390 Resetter? Do not panic, and do not throw away your printer

(The adjustment program is primarily designed for Windows XP, 7, 8, 10, or 11). Epson 1390 Adjustment Program (AdjProg.exe) downloaded.

Complete Guide to Using an Epson 1390 Resetter: Fix the Waste Ink Pad Error

The Epson 1390 printer uses a sophisticated ink management system that monitors ink levels and prevents printing when the ink levels are low or empty. While this system is designed to ensure high-quality prints, it can be costly and inconvenient. Here are some reasons why you might need an Epson 1390 resetter: Keep the box checked, and now click the

Download a verified Epson 1390 Adjustment Program from a reputable technician source online. The file usually arrives zipped. Right-click the folder and extract the contents to your desktop. Step 2: Open the Adjustment Program

In the Model Name drop-down menu, choose . Set the Port to USB001 (or the corresponding USB port your printer is plugged into). Step 3: Access the Maintenance Menu Click on the "Particular adjustment mode" button.