To prevent joint strain and optimize power transfer, customize the ergonomics of your Bionix Prime Fit before riding. Seat Height Adjustment
Pay close attention to the pedal cranks marked “L” (Left) and “R” (Right). The right pedal tightens clockwise, while the left pedal tightens counter-clockwise . Secure them firmly.
Before assembling or using your Bionix Prime Fit Exercise Bike, please read this manual carefully and ensure that you understand the following: Bionix Prime Fit Exercise Bike Manual
Connect the internal wire from the handlebar mast to the console wire before bolting the handlebars to the main frame. Operating the Console MODE/RESET Button:
Visually inspect all moving parts. Ensure the pedals are tight and that the adjustable knobs on the seat and handlebars are securely locked. To prevent joint strain and optimize power transfer,
Remove the pre-installed bolts from the handlebar post housing on the main frame. Connect the lower computer sensor wire emerging from the frame to the upper extension wire inside the handlebar post. Carefully slide the handlebar post into the frame, ensuring you do not pinch the internal wires. Secure the post using the hex bolts and spring washers. Step 4: Mount the Handlebars and Console
Bionix Prime Fit Exercise Bike Manual: Complete Setup, Console, and Maintenance Guide Secure them firmly
Displays your current heart rate when your hands are placed firmly on the integrated handlebar grip sensors. Button Functions
Press to cycle through display metrics. Hold for three seconds to reset all values (except Odometer) to zero.
Use a soft cloth and mild detergent; avoid corrosive cleaners. Lubrication:
Tracks total elapsed workout time or counts down a target time. Speed: Displays current cycling speed in MPH or KM/H.