Enter the from the Articco code library using the number pad. The LED light will turn off if the code is accepted.

Test primary features such as volume, temperature alteration, and power toggles. If the buttons operate correctly, press or OK once more to save the pairing profile. If some keys fail, repeat the procedure. Method 2: Manual Direct Code Entry

Even with the manual, things go wrong. Here is how to fix the most frequent errors.

| Terminal | Signal | | :--- | :--- | | 1 | Power L (Live) | | 2 | Power N (Neutral) | | 3 | Sensor Temp + (PT100 Red) | | 4 | Sensor Temp - (PT100 White) | | 5 | Sensor Hum + (4-20mA +) | | 6 | Sensor Hum - (4-20mA -) | | 7 | Relay 1 – COM | | 8 | Relay 1 – NO (Heater/Cooler) | | 9 | Relay 2 – COM | | 10 | Relay 2 – NO (Humidifier) |

Hold down the that matches your equipment for 5 seconds.

and your air conditioning unit, you can choose between two main synchronization techniques. Ensure your air conditioner is (powered off but receiving electricity) before starting. Method 1: Direct Manual Code Entry (Recommended)

Before diving into the manual setup, it is important to understand what this device is. The Articco TH-MSUR-40 is a basic, infrared (IR) universal remote control. It is not a Bluetooth or RF (Radio Frequency) remote, meaning it requires a direct line of sight to your devices.

Once configured, you can also integrate the Smart Life app with voice assistants like Amazon Alexa or Google Assistant, depending on your device compatibility.

Disclaimer: This guide is independently created for informational purposes. Control Universal and Articco are trademarks of their respective owners.