Aodelan Wtr2 User Manual Now

Turn on the WTR2 transmitter and receiver. Ensure they share the same channel.

Slide the receiver into the camera's hot shoe mount and lock it down.

To ensure reliable operation, the transmitter and receiver must share the same digital channel (01 to 99) or use the Smart Channel mode (00).

Dual-stage button (half-press to focus, full-press to shoot). ARROW Keys: Navigates menus and adjusts numerical values. SET Button: Confirms selections and locks settings. aodelan wtr2 user manual

The WTR2 is efficient, but the LCD backlight consumes power. Turn the units off when moving between locations.

References

: Long press to turn on/off; short press to activate the backlight. 2. The WTR2 Receiver Turn on the WTR2 transmitter and receiver

Secures the receiver to the top of your camera.

Slide the Receiver into the camera’s hot shoe (optional; it can dangle, but the hot shoe holds it securely). Step 3: Pairing Transmitter and Receiver Turn on the transmitter and receiver.

Determines how long the shutter stays open. This mode requires your camera to be set to "BULB" mode. (Range: 1 second to 99 hours, 59 minutes, 59 seconds). To ensure reliable operation, the transmitter and receiver

The receiver can be used as a wired remote if batteries fail. 2. Components of the WTR2 System

Check if the receiver power is active and the LED flashes when commands are sent. Ensure the 2.5mm cable is pushed completely into both the receiver and the camera ports. Verify that the transmitter and receiver are set to the exact same channel.

Before diving into the settings, ensure you have all the components: The handheld unit with the LCD screen.