Edmi Mk6n Genius User Manual -
is a top-tier, high-accuracy, three-phase smart energy meter designed for commercial, industrial, and substation applications. As part of the prestigious Genius series, the Mk6N offers advanced functionality, comprehensive data logging, robust security, and flexible communication options, making it a favorite among utility companies and system integrators. This article serves as a detailed overview of the EDMI Mk6N Genius
Schedule a field technician visit to replace the internal lithium backup battery. NVRAM Corruption Error
When the MK6N detects an internal fault or an installation anomaly, it flags an error code on the LCD display. Error Code Action Required Battery Failure
| Symptom | Likely Cause (per EDMI documentation) | Action | | :--- | :--- | :--- | | | Power loss (Check voltage L-N) or LCD contrast drift. | Verify supply voltage; perform manual reset via disconnect switch. | | Constant red LED flash | Normal operation (Kh pulse). 3200 imp/kWh = active load. | No action needed. | | Display shows "Err 1" | Real Time Clock (RTC) battery failure. | Requires factory repair. | edmi mk6n genius user manual
The meter features a 16-character by 2-line alphanumeric LCD display that can show up to 64 user-definable screens. Press any button to wake the display. Hold the Right/OK button to enter the main menu.
Equipped with a 16-character, 2-line alphanumeric dot-matrix LCD capable of displaying up to 64 user-defined screens. Connectivity and Alarms
Internal lithium battery voltage has dropped below the threshold. The battery must be replaced to ensure timekeeping persists during power outages. Register data is safe in non-volatile flash memory. is a top-tier, high-accuracy, three-phase smart energy meter
The MK6N is engineered for high accuracy and robust data management in complex energy environments.
For users setting up a complete Energy Monitoring System (EMS), additional components may be required, such as a 4G router for remote access, an industrial PC as a data server, and a managed switch to network all devices. Circuit protection devices like Miniature Circuit Breakers (MCBs) and surge protectors should also be installed on the power supply lines.
Mount the meter vertically on a flat, vibration-free surface using three secure fixing screws. NVRAM Corruption Error When the MK6N detects an
A typical EDMI MK6N installation as part of a comprehensive Energy Monitoring System (RMS) includes the following components:
The Mk6N belongs to the Genius class of EDMI meters. It is designed for three-phase installations and supports both direct connect and Transformer Operated (CT or CT/VT) configurations. Technical Data
Which (optical, RS-485, or cellular) are you trying to configure?
The terminal block layouts vary based on whether the unit is a direct-connect or a CT/VT operated meter. Always refer to the specific wiring diagram printed on the inside of the meter's terminal cover.
1(2)A, 1(4)A, 5(10)A, or customized CT/VT ratios. Frequency: 50 Hz / 60 Hz ( ±plus or minus Enclosure Rating: IP54 (dust and splash protection). Operating Temperature: -40°C to +70°C. 2. Main Hardware Features and Display Interface Physical Component Breakdown