Iwata 2crh Bundy Clock Manual [portable] -

Adjust the hour using the or DOWN keys. Note that the machine uses a 24-hour military format (e.g., 1:00 PM is 13:00). Press ENTER .

: Slide the toggle switch to the PRGM position. The digital LCD display will start blinking and present function code numbers. Programming Button Layout

Are you looking to set up for your employees?

Press the button to increase or decrease the value to the current year. iwata 2crh bundy clock manual

: Large, high-visibility backlit LCD screen showing time, date, and day of the week.

To program your Iwata 2CRH, you must remove the top cover using the provided key to access the control panel switch. 1. Entering Program Mode Unlock and remove the top casing.

Pinch the ribbon release tabs or clips and pull the old cassette straight out. Adjust the hour using the or DOWN keys

Slide the new cassette into place, ensuring the ribbon film sits neatly between the print head and the card guide.

A: The color-change solenoid has failed, or the DIP switch controlling the color interval is set to "Off." Refer to the DIP switch chart in Section 3.

Locate the small "Program" or "Set-up" switch (usually near the top or back) and slide it to the right (Programming mode). : Slide the toggle switch to the PRGM position

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

| Section | Likely Content | |---------|----------------| | 1. Installation | Wall mounting height (center of card slot at ~48″ from floor), leveling, grounding | | 2. Power connection | Voltage selector (if present), fuse rating (often 0.5A/250V slow-blow) | | 3. Loading ribbon | Removing cover, routing black/red ribbon, tension adjustment | | 4. Setting time | Using levers on back or side – | | 5. Setting date/day | Separate knobs for month, date, day-of-week (if present) | | 6. Card insertion | Align card edge with left guide, push firmly until it clicks | | 7. Adjusting color-change time | Set “late” threshold (e.g., 8:01 AM prints red) | | 8. Cleaning schedule | Monthly cleaning of print wheels, guide rails, ribbon advance |

2 Watts standby / 10 Watts active; includes a DC13V 1A adapter.

If you own a fully functional 2CRH, consider scanning any paper documentation you have and uploading it to the public domain. Until then, bookmark this guide as your primary reference for the .

The internal calendar date is incorrect, or the column shift schedule is misprogrammed.