Now that the boot image is installed, you need to install the recovery to flash the ROM. Flash the crDroid Recovery image: fastboot flash recovery .img Use code with caution.
Note: If you renamed the file, replace boot.img with the actual filename.
Use the volume keys on your phone to navigate the fastboot menu until you see . Press the Power button to select it.
crDroid 9/10 (A13/A14) tested. YMMV.
: From your specific device's page on crDroid.net, download the: ROM zip (e.g., crDroidAndroid-15.0-xxx.zip (and others like vendor_boot.img if listed for your device). : Flashing will wipe all data on your internal storage. Step 1: Boot into Fastboot Mode Power off your device completely. Press and hold the Power + Volume Down buttons simultaneously until the "FASTBOOT" screen appears. Connect your phone to your PC via a reliable USB cable. crdroid bootimg install
If you are updating crDroid from version 9.x to 10.x, always flash the new boot.img along with the full ROM. Do not keep the old boot image.
Depending on your device architecture, the exact flash command will differ slightly. Follow the sub-step that matches your device type. For Standard Devices (Single Boot Partition)
Download the official from the Android Developer website.
Now that you're prepared, let's dive into the CRDroid bootimg install process: Now that the boot image is installed, you
Flashing the boot image is only the first step. The full crDroid experience requires additional components.
Download the official for Windows, Mac, or Linux.
The boot.img usually contains the crDroid recovery. Flashing it allows you to access the interface needed to install the actual ROM.
Installing (typically for its custom recovery) involves a precise sequence of Use the volume keys on your phone to
Alternatively, use the universal command (works on most modern fastboot):
✅ If device boots normally: Open Magisk → It should say "Installed (Ramdisk)". ✅ If bootloop: Reboot to bootloader → Flash the (extract from crDroid ZIP). ✅ To extract stock boot.img: Download crDroid ROM.zip → Unzip → find boot.img or init_boot.img .
Note: For some newer devices, you might need to flash to specific slots (e.g., fastboot flash boot_a boot.img and fastboot flash boot_b boot.img ), but usually, the standard command works. Step 4: Enter crDroid Recovery