Use the standard Acronis recovery process to restore your backup image to the new disk.

If Universal Restore completes but the system still loops into a BSOD (typically error INACCESSIBLE_BOOT_DEVICE ), the software failed to find the correct driver for your new storage controller.

Extract these driver files and place them into a dedicated folder on a secondary USB drive or network share. Step 3: Creating the Bootable ISO or USB Drive

The root cause is the Hardware Abstraction Layer (HAL) and mass storage driver dependency. A Windows operating system image created on hardware utilizing a specific chipset (e.g., Intel Rapid Storage) will generally result in a "Blue Screen of Death" (BSOD) when booted on dissimilar hardware (e.g., an AMD chipset or a VMware virtual controller).

If you already own an Acronis product, access your account at to download the media builder. Would you like help with the specific recovery process instead?

You cannot simply download an "ISO" directly; rather, you download an that allows you to build the bootable ISO or USB drive. Steps to Download and Create the ISO

: Supports migrations between physical-to-physical (P2P), physical-to-virtual (P2V), and virtual-to-physical (V2P) platforms. 2. How to Obtain the ISO

Disabling the old hardware-specific drivers (such as IDE, SATA, or NVMe drivers).

To ensure you are fully prepared for unexpected hardware failures, I can help you customize your disaster recovery plan. Let me know:

The boot mode in the new BIOS/UEFI does not match the old system.

To download Acronis Universal Restore ISO, follow these steps:

Traditional backup solutions often require "bare metal" recovery to identical hardware to ensure success. Acronis Universal Restore changes this dynamic by:

Acronis Universal Restore is a specialized tool designed to restore a Windows or Linux system backup to a computer with different hardware (dissimilar hardware). It works by modifying the Hardware Abstraction Layer (HAL) and injecting critical mass storage and network drivers during the recovery process, ensuring the operating system can boot on the new hardware. Downloading and Creating the ISO

Download the drivers in .inf , .sys , or .cab formats. Do not use .exe installers , as the bootable environment cannot run Windows executables.

Look up the exact motherboard chipset (e.g., Intel RST, AMD RAID). Download the specific F6 Floppy/Mass Storage driver , extract the .inf file, and point Acronis Universal Restore directly to that file. Error: System loops into Recovery Mode after reboot

Here are some tips and best practices to keep in mind when using Acronis Universal Restore:

: It facilitates physical-to-physical (P2P), physical-to-virtual (P2V), and virtual-to-physical (V2P) migrations. How to Obtain and Create the ISO

. It is typically downloaded as an installer that you then use to create bootable ISO or USB media. 1. Download the Tool