Anilam Mini Wizard A163 Manual Top

Dedicated LED numeric screens showing the current position for each axis.

Even the best DROs encounter issues. Here are the top five problems and solutions found within the troubleshooting section of the manual.

Used to reference the primary workpiece datum (the main zero point of your blueprint).

: Translates linear encoder pulses from precision glass scales into a clear numeric layout with independent zeroing buttons for the primary axes. anilam mini wizard a163 manual top

Press the dedicated button to instantly convert the display. The corresponding LED indicator will light up next to the active unit. 4. Calibration and Parameter Settings

The A163 series, including the A163-20000 and A163-3010 models, processes signals from linear encoders or glass scales to provide real-time position feedback. Control System Labs

This feature halves the distance between two points, allowing you to find the exact center of a workpiece or vise. Dedicated LED numeric screens showing the current position

Press again. The display will show the distance to the center. Troubleshooting and Maintenance

The A163 console usually features a numeric keypad, function keys, and axis selection buttons.

The leftmost digit on the X-axis usually sets the boot default to inches ( 1 ) or metric ( 0 ). Core Operations to Master Used to reference the primary workpiece datum (the

Operating the Mini Wizard A163 relies on a simple, intuitive layout. Zeroing an Axis Press the or Y axis selection key. Press the RESET or 0 key to clear the current dimension. Presetting a Value Press the desired axis key (e.g., X ). Use the numeric keypad to type your target dimension.

Power down the unit, wait 30 seconds, and turn it back on. Ensure grounding wire is secure. Incorrect internal dip switch setting.

: Available primarily in 2-axis and 3-axis configurations.

: Use the fourth digit from the right to reverse the +/- count direction if the axis is moving the "wrong" way.

Many A163 units use internal Dip-Switches to set resolution and error compensation. If your readings seem off, you may need to open the back cover to verify these settings. Where to Find the Manual