Never edit a blank template from scratch if you can avoid it.

: Users have reported needing versions such as R03.11.00 or higher to successfully interface with certain GM339 units.

Before launching the software, you must have the correct hardware setup to ensure communication between your computer and the radio.

: You can now modify frequencies (VHF or UHF depending on your model), PL/DPL tones, and assign functions to programmable buttons P1 through P4.

Disclaimer: Programming radios requires knowledge of local licensing regulations. Ensure all frequencies programmed are authorized for use.

Unlocking the Full Potential of Your Motorola GM339: A Programming Guide

For the GM339, you typically need the tailored for the Asia-Pacific or European region, depending on where your radio was originally sold.

Displays serial numbers, firmware versions, and model numbers.

The radio will automatically reboot with a confirmation tone when the write is successful. Troubleshooting Common Errors

: To read or write to the radio, you generally need a version of the Professional Radio CPS (often identified by part number PMVN4039 ) that is equal to or newer than the version last used to program the device.

: Set channels to High Power (typically 25W–45W depending on the model) for long-range communication or Low Power (1W–5W) for localized site use. 3. Signaling Schemes (5-Tone / MDC1200)

Finding the legitimate software is tricky because Motorola no longer sells or supports RSS for the GM339. The software is considered "End of Life" (EOL) and is typically found via preservation sites or hobbyist forums.

You typically need a cable with a USB Type-A connector for your PC and an 8-pin (RJ45-style) connector for the radio's microphone port. Many modern cables have built-in RIB (Radio Interface Box) logic, eliminating the need for a separate hardware box.

If the software is older than the firmware in the radio, it may refuse to read it. You may need a newer version of the CPS.

The Motorola GM339 is part of the . It requires the Customer Programming Software (CPS) specifically designed for this professional series. Do not confuse it with other Motorola software, like the MOTOTRBO CPS, which is for their digital radio line.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

The most common and straightforward method is using a . This cable connects directly from your radio to your PC, typically using an RJ45 plug on the radio side. You will find two main types: