Tighten the screw—ensure it is not too loose, as this can cause connection issues. 3. Check BIOS/UEFI Settings
The specifically targets wear thresholds, block failures, or sudden spikes in uncorrectable data-write errors. For example, the SSD's controller might be reporting a massive ratio of failed write operations per attempt. Once the internal health thresholds cross a dangerous line, HP's hardware diagnostics trigger the 313 code during startup.
Slide the drive firmly back into the M.2 slot, press it flat, and replace the screw. Reassemble the case and boot into diagnostics. Step 3: Check BIOS Detection Status hp nvme ssd -313- error
Incorrect BIOS settings can prevent the NVMe drive from being detected.
Disconnect all external devices (USB drives, printers, external monitors). Tighten the screw—ensure it is not too loose,
The official HP error code is Boot Device Not Found (3F3) .
Troubleshooting the HP NVME SSD -313- Error: Causes and Solutions For example, the SSD's controller might be reporting
Follow these steps in order, moving from the easiest software fixes to advanced hardware inspections. Step 1: Perform a Hard Power Reset