Always disconnect the main power source before starting the installation process.
Ensure the main power is connected. If it is a brand-new unit, leave it plugged into a live power source for 10 minutes to charge the internal backup battery.
[Related search suggestions sent.]
Press and M+ to set the exact time you want the appliance to turn OFF. Repeat these steps for programs 2 through 16 if needed. Press the Clock button to save and exit. 3. Toggling Operational Modes sinotimer tm-630s manual
Available in 12V DC, 24V DC, 110V AC, or 220V AC (check your specific model label). Load Capacity: 30A resistive load, 15A inductive load. Power Consumption: Less than 4.5 VA. Programs: 16 ON and 16 OFF settings per day. Minimum Interval: 1 minute. Countdown Range: 1 minute to 99 minutes and 59 seconds.
Integrated 3V rechargeable battery retains programs for up to 60–90 days during power outages. Installation: Designed for panel or wall mounting. Initial Setup: Unlocking and Time Sync
Connect the incoming power source (Live and Neutral) directly to Terminals 1 and 2. Always disconnect the main power source before starting
A: No, the TM-630S has a built-in rechargeable battery that preserves all programmed settings and the current time for up to 60 days during a power outage. When power is restored, the timer will resume its normal schedule.
The device is typically mounted on a DIN rail and housed in a compact white casing. Its large LCD screen provides clear visibility of the current time, day, and ON/OFF status.
The Sinotimer TM-630S is a programmable digital timer known for its high accuracy and user-friendly interface. It's designed to automate the control of various electrical devices, making it invaluable for both home and industrial applications. The timer allows for scheduling with a minimum interval of just 1 second, providing fine-grained control over your connected devices. [Related search suggestions sent
:
Understanding the specs ensures the device matches your application.
Never apply power to the output terminals (COM/NO/NC). Those are dry relay contacts.
You must set the clock to the correct time for your programs to work properly.
Minimum interval of 1 second , scalable up to 168 hours (7 days).