Check the amperage rating of your appliance. The Chevron EW-32 maxes out at 15 Amps (Resistive) and only 8 Amps for inductive motors or cooling compressors. Do not plug heavy-duty appliances exceeding these ratings into the timer, as it poses a fire hazard.
Press and hold the button for 3 seconds to toggle between standard 12-hour formatting and 24-hour formatting. The "AM" or "PM" indicator will appear in the 12-hour format. Activating Daylight Saving Time (DST)
The timer executes your programmed schedules automatically.
Chevron Digital Timer EW-32 User Manual: The Ultimate Setup and Programming Guide chevron digital timer ew-32 user manual
I can write out your exact, step-by-step button sequence to make programming flawless. Share public link
Ensure both the timer and your appliance's plug are pushed entirely into their respective outlets.
Programming the timer is straightforward. It is recommended to use a pen or pencil to press the small reset button before initial setup. Step 1: Setting the Current Time Hold down the button. Check the amperage rating of your appliance
You must hold the button while adjusting time settings.
Before you do anything, plug the timer into a wall outlet for 12 hours . This charges the internal battery so it can keep your settings even during a power outage.
Press and hold the , then press the ON/AUTO/OFF button . Press and hold the button for 3 seconds
Optional: Press PROG again to move to 2 ON if you want to configure a second schedule block.
If you need further help with your Chevron EW-32 digital timer, please let me know:
Hit , then use + / - to pick which days you want it to run (e.g., just weekdays, weekends, or every day). Set your ON time, press SET , then repeat for the OFF time.
Before plugging in your device, review the electrical ratings to ensure safe operation. Technical Specifications Chevron EW-32 Input Voltage: 125VAC, 60Hz