Check the Do ISP box. Browse and link the correct Burner File and Firmware File you sourced for your controller chip.
The process completed successfully. Disconnect and reconnect your USB drive; it should now display its original capacity and allow read/write operations.
disconnect the drive until a green "OK" or "Finish" status appears. Critical Troubleshooting Phison Mpall V5.13.0c
Below is a comprehensive technical guide on what this utility is, how it works, and how to use it safely to revive dead hardware. What is Phison MPALL V5.13.0c?
Share your success (or horror) stories below. Check the Do ISP box
Match this to your ChipGenius readout (usually left at default).
: MPALL does not always come with firmware. You may need to download specific Disconnect and reconnect your USB drive; it should
[Connect Drive] -> [Run MPALL] -> [Update Device] -> [Click Start] -> [Wait for Green]
Click the button on the right side of the interface. Your USB drive should appear in one of the numbered status boxes.