For detailed calibration or professional repair, contact authorized service providers like Micro Precision or refer to official Simco-Ion documentation . FMX-004 - Simco-Ion
kV. Below is a comprehensive guide to its operation based on the official manual and technical specifications . 1. Key Specifications to ±1.49plus or minus 1.49 kV (Low) and ±1.0plus or minus 1.0 to ±20.0plus or minus 20.0 kV (High). Ion Balance Range: to ±200plus or minus 200 V (requires ion balance plate). Accuracy: within standard conditions. Measuring Distance: exactly mm ( inch), indicated by two LED guide lights. Power: 9V manganese battery (approx. 30-hour life). 2. Standard Operation (Static Charge)
Ensure bare skin contact with the case or attach the ground snap. Low battery voltage or internal firmware lock. Replace the 9V battery and retry. Constant non-zero reading in open air The sensor plate is contaminated with dust or residue.
The Simco FMX002 manual is a critical resource for:
The Simco FMX-002 is a battery-operated, conductive-cased device designed for precise measurement of static electricity at a 1-inch distance using LED guide lights. It features a
Two concentric rings of light align into one circle when the device is exactly 25 mm away from the target surface.
: For accurate results, especially during ion balance testing, connect the grounding lead to the side of the meter and attach the other end to a known earth ground. : Press the button. A single beep indicates the device is ready.
| | Specification | | :--- | :--- | | Measurement Principle | Non-contact, vibrating electrode (field meter) | | Electrostatic Field Range | 0 to ±20.0 kV (auto-ranging between Low: 0 to ±1.49 kV and High: ±1.0 to ±20.0 kV) | | Ion Balance Range | 0 to ±200 V (with optional plate) | | Accuracy | ±10% of reading | | Resolution (Low Range) | ±0.1 kV | | Resolution (High Range) | ±1 kV | | Standard Measurement Distance | 25 mm ±1 mm (1 inch), guided by two LED beams | | Response Time | ≤1 second | | Display Update Rate | 5 times per second | | Power Supply | One 9V battery (6F22 manganese or equivalent) | | Battery Life | >30 hours of continuous operation | | Dimensions (W×D×H) | 115 mm × 65 mm × 25 mm (4.5 in × 2.6 in × 1.0 in) | | Weight (with battery) | Approx. 130 g (4.6 oz) |
Slowly bring the meter toward the surface until the two LED light beams converge into a single concentric circle on the target. Reading the Display Numerical Value : Shows the absolute voltage. : Typically indicates a positive charge and indicates a negative charge. Hold Function : Press the
Proper operation is essential for accurate results. Follow these steps to use the Step 1: Pre-Operation Preparation Ensure a 9V battery is properly installed.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
The SIMCO FMX-002 is a professional-grade, handheld, non-contact electrostatic field meter designed to measure surface electrostatic charges and verify the performance of ionization equipment. Widely used in electronics manufacturing, cleanrooms, and other ESD-sensitive environments, this guide compiles the full operational manual to help you master the FMX-002 and achieve accurate, reliable results.
Note: The FMX-002 cannot measure on conductive surfaces unless they are isolated from ground.
Simco Fmx002 Manual Full !!exclusive!! » | RELIABLE |
For detailed calibration or professional repair, contact authorized service providers like Micro Precision or refer to official Simco-Ion documentation . FMX-004 - Simco-Ion
kV. Below is a comprehensive guide to its operation based on the official manual and technical specifications . 1. Key Specifications to ±1.49plus or minus 1.49 kV (Low) and ±1.0plus or minus 1.0 to ±20.0plus or minus 20.0 kV (High). Ion Balance Range: to ±200plus or minus 200 V (requires ion balance plate). Accuracy: within standard conditions. Measuring Distance: exactly mm ( inch), indicated by two LED guide lights. Power: 9V manganese battery (approx. 30-hour life). 2. Standard Operation (Static Charge)
Ensure bare skin contact with the case or attach the ground snap. Low battery voltage or internal firmware lock. Replace the 9V battery and retry. Constant non-zero reading in open air The sensor plate is contaminated with dust or residue.
The Simco FMX002 manual is a critical resource for: simco fmx002 manual full
The Simco FMX-002 is a battery-operated, conductive-cased device designed for precise measurement of static electricity at a 1-inch distance using LED guide lights. It features a
Two concentric rings of light align into one circle when the device is exactly 25 mm away from the target surface.
: For accurate results, especially during ion balance testing, connect the grounding lead to the side of the meter and attach the other end to a known earth ground. : Press the button. A single beep indicates the device is ready. Accuracy: within standard conditions
| | Specification | | :--- | :--- | | Measurement Principle | Non-contact, vibrating electrode (field meter) | | Electrostatic Field Range | 0 to ±20.0 kV (auto-ranging between Low: 0 to ±1.49 kV and High: ±1.0 to ±20.0 kV) | | Ion Balance Range | 0 to ±200 V (with optional plate) | | Accuracy | ±10% of reading | | Resolution (Low Range) | ±0.1 kV | | Resolution (High Range) | ±1 kV | | Standard Measurement Distance | 25 mm ±1 mm (1 inch), guided by two LED beams | | Response Time | ≤1 second | | Display Update Rate | 5 times per second | | Power Supply | One 9V battery (6F22 manganese or equivalent) | | Battery Life | >30 hours of continuous operation | | Dimensions (W×D×H) | 115 mm × 65 mm × 25 mm (4.5 in × 2.6 in × 1.0 in) | | Weight (with battery) | Approx. 130 g (4.6 oz) |
Slowly bring the meter toward the surface until the two LED light beams converge into a single concentric circle on the target. Reading the Display Numerical Value : Shows the absolute voltage. : Typically indicates a positive charge and indicates a negative charge. Hold Function : Press the
Proper operation is essential for accurate results. Follow these steps to use the Step 1: Pre-Operation Preparation Ensure a 9V battery is properly installed. and other ESD-sensitive environments
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
The SIMCO FMX-002 is a professional-grade, handheld, non-contact electrostatic field meter designed to measure surface electrostatic charges and verify the performance of ionization equipment. Widely used in electronics manufacturing, cleanrooms, and other ESD-sensitive environments, this guide compiles the full operational manual to help you master the FMX-002 and achieve accurate, reliable results.
Note: The FMX-002 cannot measure on conductive surfaces unless they are isolated from ground.
Glad it was useful for you! 🙂