Amada Digipro Manual Portable

: Turn on the unit and locate the calibration option via the interface. On legacy controllers like the CD2000, navigate to the DigiPro auxiliary menu.

Wait for the display to register exactly 90.00° (or 0.00° depending on your specific model's software version setup). Release the button to lock in the reference point. 3. Step-by-Step Operating Instructions

Confirm the position on the device to set the zero reference point. amada digipro manual

Press the button to calibrate the tool to the horizontal plane. Step 2: Measuring the Workpiece Angle Complete the initial bend on your Amada press brake. Wait for the ram to return to the top dead center (TDC).

Let me know, and I’ll provide legally safe, helpful technical insights. : Turn on the unit and locate the

The press brake automatically applies the correction for subsequent parts, ensuring consistency even if material properties like thickness or grain direction vary. Maintenance & Safety

Always store the DigiPro in its protective padded case when not in use. Avoid exposing the unit to extreme heat, moisture, or heavy dust environments. Release the button to lock in the reference point

Houses standard batteries (typically 9V or AA, depending on the generation).

Digital LCD with multiple units like degrees, radians, or percentages. 💡 Pro Tips for Operators

In the world of precision sheet metal fabrication, achieving a perfect bend angle is both an art and a science. For operators and engineers working with Amada press brakes, one tool stands out as essential for achieving that goal: the Amada DigiPro electronic angle measurement system.

Accept the input; the control will automatically adjust the D-axis depth for the next stroke. Maintenance and Calibration Best Practices