Using production tools will erase all data on the USB drive.

If the device is not working, the issue is typically a missing or improper driver. Since this is a standard Mass Storage Device, it should use the generic Windows USBSTOR.SYS driver. Method A: Update Drivers via Device Manager Right-click the Start button and select .

The hardware identifier corresponds directly to a mass storage device manufactured by Chipsbank Microelectronics Co., Ltd. . Devices carrying this specific combination are typically USB 2.0 flash drives or card readers utilizing budget storage controllers, such as the Chipsbank CBM2199 series (CBM2199E/CBM2199S) or CBM2098 .

The controller chip (Chipsbank) has lost its internal programming.

Chipsbank controllers are frequently used in "fake" high-capacity drives (e.g., a drive labeled 2TB that is actually 8GB). If your VID 1E3D device is acting strangely, use a tool like to verify the actual storage capacity. If you'd like to try a deep fix, let me know: Is the device a flash drive or a card reader ? Does it show up in Disk Management with a drive letter?

Since this ID belongs to a Chipsbank controller, standard Windows formatting tools often fail. You will need "Mass Production Tools" (MPTools) specifically designed for Chipsbank hardware. 1. Verify the Chipset

What specific does Windows show when you plug the drive in?

: Described as "HighSpeed" under the USB 2.0 protocol, though actual speeds depend on the specific flash memory chip paired with the Chipsbank controller. The "Chipsbank Experience": A Review

Based on driver databases, hardware forums, and USB ID repositories, specifically points to a USB-to-Serial Bridge Controller or a Data Acquisition Module .