Windows 11 will often block legacy installers unless they are forced into a legacy environment: Right-click the downloaded file and select Properties Compatibility "Run this program in compatibility mode for:" and select (or Windows 8). "Run this program as an administrator" 4. Installation & Connection Run the installer and follow the prompts. your computer again after the installation finishes.
Here’s a concise review of using the (also known as the Bamboo Pen & Touch) on Windows 11 :
This report addresses the compatibility of the legacy Wacom Bamboo CTH-470 tablet with the Windows 11 operating system. The Wacom Bamboo CTH-470 is a legacy device (released approx. 2011) that has reached "End of Life" (EOL) status. Consequently, Wacom does not officially support this device on Windows 11, and no dedicated Windows 11 drivers exist.
Search for driver version (the final driver supporting the CTH-470). Download the installation file to your desktop. Step 2: Change Compatibility Settings Right-click the downloaded .exe file. Select Properties . Click the Compatibility tab. Check Run this program in compatibility mode for . Select Windows 7 or Windows 8 from the dropdown menu. Check Run this program as an administrator . Click Apply and then OK . Step 3: Install and Restart Run the installer. wacom bamboo cth-470 driver windows 11
Download and install the latest (or newer) from the official Microsoft website. Step 2: Clear Wacom Drivers
The old installer often blocks installation on Windows 11 due to driver signature enforcement or compatibility checks. Method 1: The Modified Open-Source Driver (Recommended)
Because this driver was coded for older Windows architectures, a standard installation often fails on Windows 11. The following procedure is required: Windows 11 will often block legacy installers unless
Extremely lightweight on system resources compared to old Wacom suites.
Conflicts between different driver versions will cause tracking issues or error messages. Unplug your Wacom CTH-470 tablet from your PC. Press the to open Settings . Navigate to Apps > Installed apps . Search for any existing "Wacom" or "Tablet" software.
This guide covers the two best methods to get your CTH-470 working perfectly on Windows 11, including pressure sensitivity and touch gestures. your computer again after the installation finishes
To prevent setup failures, you must fully remove any previously installed tablet software.
Refusing to let the tablet become e-waste, the artist embarked on a quest for a solution. They found three paths through the digital wilderness:
immediately after the installation finishes. Plug your CTH-470 tablet into a USB port.