V2ray Mikrotik __link__ Jun 2026

Create environment variables to pass your V2Ray config details. This is an alternative to mounting a config file, making it easier to manage on RouterOS.

Suddenly, the digital fences vanished. Elias watched his monitor as restricted pages loaded in milliseconds. The MikroTik stood firm, its LEDs blinking rhythmically, acting as the perfect physical shield for the invisible spirit living inside its circuits. The workhorse and the shapeshifter had become one. technical steps

Use /ip firewall mangle to "mark" connections originating from your LAN that match your destination address list.

: Use Vless with XTLS or Trojan-Go, which are harder to detect than standard VPNs like L2TP or WireGuard.

However, there is a catch: RouterOS is Linux-based, but it lacks the userland tools to run Go-based binaries directly. So, how do we bridge the gap? v2ray mikrotik

interface and a bridge to allow the container to communicate with the router's internal network. Policy Based Routing (PBR) Mangle rules

If you navigate to /container and see an unknown command error, your router does not have the extra package component installed. Go to the MikroTik Downloads page, pull down the "Extra Packages" archive corresponding to your exact CPU architecture type, extract the .npk file, upload it onto your router storage root, and trigger a standard reboot.

: Your router must have an ARM, ARM64, or x86 CPU. MIPSBE devices do not support containers.

Deploy V2Ray on your secondary Linux device inside your local network. 192.168.88.1 V2Ray Proxy Server IP: 192.168.88.10 Create environment variables to pass your V2Ray config

V2Ray is highly effective at obfuscating traffic to bypass firewall restrictions. Prerequisites

To set up V2Ray on a Mikrotik device, follow these steps:

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

: Create a new routing table that points the gateway to the container's IP address ( 172.17.0.2 ). DNS Considerations Elias watched his monitor as restricted pages loaded

Standard VPNs were being snuffed out like candles in a storm. Elias needed something more discreet. He needed a ghost. He decided to introduce his MikroTik to The integration wasn't easy. MikroTik’s

Ensure your V2Ray config.json handles DNS resolution internally using its built-in DNS features routing to 1.1.1.1 or 8.8.8.8 over the proxy tunnel. Troubleshooting Common Issues

Solution: Ensure your config.json has "user": "root" inside the inbound/outbound settings. Add cap-add=net-admin to the container config.