The KES timer features a built-in backup battery to keep its memory during power cuts. If the screen is blank, the internal battery may be completely drained. Leave the unit connected to mains power for at least an hour to charge, then press the Reset button.
KES Geyser Load Control Timer users have reported positive experiences with the device, citing its ease of use, energy efficiency, and reliability. Some users have noted that the device is easy to install and program, while others have reported issues with the display and timer settings.
The unit can be installed on a inside an electrical distribution (DB) panel or surface-mounted, often in a ceiling cavity near the geyser isolator. kes geyser load control timer manual new
Select a proper mounting location inside the distribution panel. Secure the Go to product viewer dialog for this item. on the DIN Rail using the securing clips.
Where can I find the exact manual for my KES timer? The KES timer features a built-in backup battery
This comprehensive manual provides step-by-step instructions for installing, programming, and troubleshooting your new KES Geyser Load Control Timer. Technical Specifications
Electrical work carries inherent risks of shock and fire. It is highly recommended that a certified electrician handle the installation to ensure compliance with local electrical codes. KES Geyser Load Control Timer users have reported
For detailed technical diagrams and full program options, refer to the HellermannTyton Geyser Timer Manual .
Disclaimer: High-voltage work can be dangerous. Installation must be performed by a qualified electrician or under strict safety guidelines. Always switch off the main DB power supply first. Prerequisites KES ISG1201 Go to product viewer dialog for this item. Timer Unit Flat screwdriver Appropriate wire cutters/strippers DIN Rail space in the DB Board