Type the following command and press Enter: wmic baseboard get product,Manufacturer,version
An ACA (Australian Communications Authority) compliance mark.
If your system still boots, you can bypass reading the board physically:
The AMI BIOS on the N1996 is spartan but functional. Access by pressing during POST. Type the following command and press Enter: wmic
Here are some of the key features of the MSI N1996 motherboard:
Look directly on the circuit board between the PCI or PCI Express expansion slots. MSI prints the actual model number (e.g., MS-7267 ver 4.2 ) in bright white lettering in this specific area.
If you need an actual , MSI no longer hosts it on their official site. You can find scanned copies via: Here are some of the key features of
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
PCI Express x16 (for graphics), PCI Express x1, and legacy PCI slots.
: If the PC is functional, press Windows + R , type msinfo32 , and check the BaseBoard Product field. You can find scanned copies via: This public
: This free utility from CPUID provides detailed information under the "Mainboard" tab, including the chipset and model name. Common Motherboards Often Labeled "N1996"
There is no specific "MSI N1996" manual released in 2021. The boards carrying the N1996 sticker are typically older models (manufactured between 2005–2010), such as the MS-7267 , K9VGM-V , or K9N6PGM2-V .
Let's get straight to the point: This is a regulatory marking required by the Australian Communications and Media Authority (ACMA). For a product to be legally sold in Australia, it must carry an ACA (Australian Communications Authority) supplier code number. MSI’s assigned code is N1996 [6†L14-L17].
| Setting | Recommended Value | Why | |---------|-------------------|-----| | | IDE (not AHCI) | ICH7 on G31 lacks native AHCI; forcing AHCI causes boot BSOD | | HPET | Enabled | Required for accurate timers in Windows 10 | | Legacy USB | Enabled | Allows keyboard in BIOS; disable after OS install | | Boot Order | USB → DVD → HDD | For OS installation from flash drive | | CPU Feature | C1E, EIST (Enabled) | Reduces power/heat for Core 2 Duo | | Memory Timing | By SPD | Ensures stability with mixed DDR2 modules |