Shinecon — Sc-b04 Manual

Includes primary face buttons (A, B, X, Y), shoulder buttons (L1/L2/R1/R2), and system buttons (Start/Select) [12]. 3. Getting Started Powering On/Off Press and hold the Power/Start

Place your phone horizontally (landscape mode). The phone’s charging port must be on the left or right side (usually the bottom cutout aligns with the port).

: Press and hold the HOME (or Power/Start) button until the LED light flashes (about 3 seconds) to turn it on. To power off, hold the same button for about 5 seconds until the LED turns off.

The Shinecon SC-B04 is a Bluetooth 3.0 wireless remote for Android and iOS, functioning as a VR gamepad, camera shutter, and media controller, powered by two AAA batteries. Pairing requires holding the power button until the LED flashes, while mode switching is achieved by holding the "@" button combined with A, B, C, or D for specific functions.

Make sure you are holding the power button down for at least 3 to 5 seconds. Bluetooth Cannot Find the "Shinecon-B04" Signal shinecon sc-b04 manual

: Enable Bluetooth on your smartphone and select " VR Shinecon-xxx " from the list of available devices to connect. Operation Modes

If you found this guide helpful, bookmark this page. The Shinecon SC-B04 is a fantastic entry-level headset – you just need the right manual to unlock its full potential.

: Android, PC (Windows), and limited support for iOS. Dimensions : 153 x 108 x 53 mm. Pairing & Connectivity Connecting to Mobile Devices (Android/iOS) Power Off : Ensure the controller is initially turned off.

Understanding the physical layout is crucial because buttons change functions based on the mode you select. Includes primary face buttons (A, B, X, Y),

: Displays power status, pairing modes, and battery life.

| Specification | Detail | | :--- | :--- | | | SC-B04 | | Product Dimensions | 153 x 108 x 53 mm | | Connectivity | Bluetooth 3.0 / 4.0 EDR | | Compatibility | Android, iOS, Windows, VR Headsets | | Wireless Range | Up to 10 meters (approx. 30 ft) | | Battery Life | Up to 35 hours (on a full charge) | | Charging Time | Approx. 2-3 hours | | Special Features | Built-in phone holder, dual vibration motors |

: Press and hold the START button for about 2–3 seconds until the LED indicator begins to flash.

For optimal performance with VR glasses, turn the controller on before launching the VR app. Disclaimer: This information is based on standard Shinecon SC-B04 The phone’s charging port must be on the

This comprehensive manual provides step-by-step setup instructions, a breakdown of operational modes, button layouts, and troubleshooting tips to help you maximize your device. 1. Product Overview and Specifications

When you purchase an original Shinecon product, the box typically includes:

Before connecting the controller to any device, ensure you have inserted fresh batteries (typically 2x AAA batteries, depending on the exact hardware revision) or fully charged the unit via its Micro-USB port.

, making it a reliable companion for long gaming sessions. While it is marketed as compatible with both iOS and Android

Setting up your SC-B04 is straightforward. Follow these steps: